GYEON
Q²M WaterSpot
Acidic mineral-deposit removerUse with care
Appropriate for fresh mineral deposits on approved surfaces, but no chemical can rebuild clear coat already etched by prolonged deposits.
The chemistry
Acidic ingredients dissolve alkaline calcium and magnesium compounds, allowing intact deposits to release from the surface.
Use it when
- Fresh hard-water spots
- Mineral residue after washing
- Coating maintenance when deposits are masking hydrophobic behavior
Compatible surfaces
- Compatible glossy paint
- Exterior glass
- Coatings approved for acidic maintenance
Avoid or verify first
- Acid-sensitive metals and matte finishes
- Hot panels or extended dwell
- Repeated treatment of physical etching
How to use Q²M WaterSpot safely
- 1Confirm the surface, cool it and test a hidden spot before treating the visible area.
- 2Apply the minimum product needed, allow controlled dwell and agitate only with surface-safe tools.
- 3Remove all residue by rinsing or damp-towel wiping as directed, then inspect after the surface dries.
Directions and formulas change
Read the current bottle label and safety data before use. Vehicle, coating, film and material-maker instructions take priority over this editorial guide.
GYEON official product information