3D
ACA 500 X-TRA Cut Compound
Heavy-cut alpha-ceramic abrasive compoundAdvanced DIY
A rapid-cut product for serious correction work where paint measurement, controlled pad cleaning and follow-up refinement are available.
The chemistry
Hard engineered ceramic abrasives mechanically remove damaged paint at high cutting speed while producing a refinable surface.
Use it when
- Severe swirls
- Oxidation
- Appropriate sanding-mark refinement
Compatible surfaces
- Cured clear coat
- Compatible single-stage paint
- Paint systems with adequate measurable thickness
Avoid or verify first
- Thin paint, edges and body lines
- Matte finishes
- Continuous polishing without cleaning the pad and checking temperature
How to use ACA 500 X-TRA Cut Compound safely
- 1Wash, chemically decontaminate and measure or assess the finish before using an abrasive.
- 2Test the least aggressive pad-and-product combination on a small area and make controlled passes.
- 3Remove residue with clean microfiber, inspect under direct light and stop once the target improvement is reached.
Directions and formulas change
Read the current bottle label and safety data before use. Vehicle, coating, film and material-maker instructions take priority over this editorial guide.
3D official product information