Meguiar's
M110 Ultra Pro Speed Compound
Professional heavy-cut compoundAdvanced DIY
A fast defect-removal compound for machine polishing where paint thickness, pad choice and follow-up finishing are understood.
The chemistry
Engineered abrasive particles mechanically level microscopic high points in paint, permanently removing a controlled amount of clear coat.
Use it when
- Moderate to severe swirls
- Sanding-mark refinement within product capability
- Oxidation on measurable paint
Compatible surfaces
- Cured gloss clear coat
- Compatible single-stage paint
- Small test sections before full-panel correction
Avoid or verify first
- Matte finishes
- Thin or failing clear coat
- Edges, body lines and heat-sensitive repairs without protection
How to use M110 Ultra Pro Speed Compound safely
- 1Wash, chemically decontaminate and measure or assess the finish before using an abrasive.
- 2Test the least aggressive pad-and-product combination on a small area and make controlled passes.
- 3Remove residue with clean microfiber, inspect under direct light and stop once the target improvement is reached.
Directions and formulas change
Read the current bottle label and safety data before use. Vehicle, coating, film and material-maker instructions take priority over this editorial guide.
Meguiar's official product information