Meguiar's
M210 Ultra Pro Finishing Polish
Professional finishing polishUse with care
A refinement polish for haze and light defects after compounding, with cut and finish controlled heavily by pad choice.
The chemistry
Fine engineered abrasives level shallow defects and compound haze while leaving a smoother optical surface.
Use it when
- Refining compound haze
- Light swirls
- Final gloss polishing before protection
Compatible surfaces
- Cured glossy clear coat
- Compatible single-stage paint
- Test sections using suitable polishing pads
Avoid or verify first
- Matte paint
- Trying to remove defects deeper than the safe paint budget
- Polishing contaminated or hot surfaces
How to use M210 Ultra Pro Finishing Polish safely
- 1Wash, chemically decontaminate and measure or assess the finish before using an abrasive.
- 2Test the least aggressive pad-and-product combination on a small area and make controlled passes.
- 3Remove residue with clean microfiber, inspect under direct light and stop once the target improvement is reached.
Directions and formulas change
Read the current bottle label and safety data before use. Vehicle, coating, film and material-maker instructions take priority over this editorial guide.
Meguiar's official product information