3D
ACA 520 Finishing Polish
Fine alpha-ceramic finishing polishUse with care
A refinement partner for compound haze and light defects, with final clarity dependent on paint hardness, pad and wipe technique.
The chemistry
Fine ceramic abrasives level shallow haze and micro-marring while removing less material than the matching cutting compound.
Use it when
- Refining ACA 500 or other compound haze
- Light swirl removal
- Final gloss polishing
Compatible surfaces
- Cured gloss clear coat
- Compatible single-stage paint
- Clean, decontaminated polished surfaces
Avoid or verify first
- Matte paint
- Deep scratches
- Using contaminated towels that reintroduce marring
How to use ACA 520 Finishing Polish safely
- 1Wash, chemically decontaminate and measure or assess the finish before using an abrasive.
- 2Test the least aggressive pad-and-product combination on a small area and make controlled passes.
- 3Remove residue with clean microfiber, inspect under direct light and stop once the target improvement is reached.
Directions and formulas change
Read the current bottle label and safety data before use. Vehicle, coating, film and material-maker instructions take priority over this editorial guide.
3D official product information