3D
ONE Hybrid Compound & Polish
Pad-dependent one-step polishUse with care
Versatile because pad and technique shift the cut-to-finish balance, but no single liquid produces the same result on every paint system.
The chemistry
Adaptive abrasive technology mechanically levels defects, with pad stiffness and polishing cycle controlling cutting force and finishing clarity.
Use it when
- One-step enhancement details
- Moderate swirls
- A single liquid is paired with multiple test pads
Compatible surfaces
- Cured glossy paint
- Clear coat
- Compatible single-stage paint
Avoid or verify first
- Matte paint
- Deep scratches and failing clear coat
- Skipping a test spot because the product is marketed as one-step
How to use ONE Hybrid Compound & Polish safely
- 1Wash, chemically decontaminate and measure or assess the finish before using an abrasive.
- 2Test the least aggressive pad-and-product combination on a small area and make controlled passes.
- 3Remove residue with clean microfiber, inspect under direct light and stop once the target improvement is reached.
Directions and formulas change
Read the current bottle label and safety data before use. Vehicle, coating, film and material-maker instructions take priority over this editorial guide.
3D official product information