Koch-Chemie
Fine Cut F6.01
Medium-cut finishing compoundUse with care
A middle-step polish for moderate defects or refining heavy compound marks without jumping directly to an ultra-fine finish.
The chemistry
Medium abrasives mechanically level shallow scratches and haze while breaking down or refining to a clearer finish.
Use it when
- Moderate swirl correction
- Refining heavy-cut haze
- One-step polishing on compatible paint
Compatible surfaces
- Gloss clear coat
- Compatible single-stage paint
- Machine-polishable cured finishes
Avoid or verify first
- Matte surfaces
- Deep defects beyond safe removal
- Dirty pads and contaminated paint
How to use Fine Cut F6.01 safely
- 1Wash, chemically decontaminate and measure or assess the finish before using an abrasive.
- 2Test the least aggressive pad-and-product combination on a small area and make controlled passes.
- 3Remove residue with clean microfiber, inspect under direct light and stop once the target improvement is reached.
Directions and formulas change
Read the current bottle label and safety data before use. Vehicle, coating, film and material-maker instructions take priority over this editorial guide.
Koch-Chemie official product information