Koch-Chemie
Micro Cut M3.02
Ultra-fine finishing polishUse with care
A final jeweling step for micro-marring and holograms when stronger defect removal is no longer needed.
The chemistry
Ultra-fine abrasives level extremely shallow optical defects, improving reflection clarity with limited material removal.
Use it when
- Removing holograms
- Refining soft paint
- Final gloss before protection
Compatible surfaces
- Cured glossy clear coat
- Compatible single-stage paint
- Prepared paint free of bonded contamination
Avoid or verify first
- Matte finishes
- Expecting heavy scratch removal
- Long polishing cycles that add unnecessary heat
How to use Micro Cut M3.02 safely
- 1Wash, chemically decontaminate and measure or assess the finish before using an abrasive.
- 2Test the least aggressive pad-and-product combination on a small area and make controlled passes.
- 3Remove residue with clean microfiber, inspect under direct light and stop once the target improvement is reached.
Directions and formulas change
Read the current bottle label and safety data before use. Vehicle, coating, film and material-maker instructions take priority over this editorial guide.
Koch-Chemie official product information